Free USPS First Class Shipping! 

SMOK QBox 50W TC Starter Kit With TFV8 Baby Beast Tank

$ 44.99

You will receive 44 PUFF DOLLARS with this purchase.
Sign-up and you can redeem PUFF DOLLARS for discounts and free gifts.

- +

*Free USPS First Class Shipping!


The Smok QBox 50W TC Starter Kit With TFV8 Baby Beast Tank Starter Kit includes:

  • QBox 50W TC Box MOD features:
    • Dimensions: 54.8*33.57*25mm
    • Zinc Alloy Construction
    • 1600mAh Internal Battery Capacity
    • Wattage Range: 1W - 50W
    • Temperature Range: 200°F - 600°F / 100°C - 315°C
    • Voltage Range: 0.1V - 90V
    • Resistance Range:
      • 0.1Ω - 3.0Ω (VW Mode)
      • 0.06Ω - 3.0Ω (TC Modes)
    • Fully Charged 1600mAh Battery in 1.5 ~ 2hrs (1A)
    • 0.96 OLED Display
    • Detailed Vaping Info
    • Compact Size
    • Intelligent Atomizer Recognition
    • Puff Monitoring System
    • 12 Second Cut Off
    • Short Circuit Protection
    • Over-Heating Protection
    • Low Battery Warning
  • TFV8 Baby Beast Vape Tank features:
    • Dimensions: 53*22mm
    • 3.0ml Tank capacity
    • Stainless steel construction
    • Glass tank section
    • Dual cyclops adjustable airflow
    • Swivel top fill system
    • Wide bore Delrin drip tip
    • One V8 Baby-Q2 Coil (0.4O Pre-Installed)
    • One V8 Baby-T8 Coil (0.15O)
    • One replacement glass tube
    • One sealing pad
    • Two Smok Silicone vapor bands
    • Five spare O-rings

    The Smok AL85 Alien Baby 85W TC Starter Kit includes:


      • 1 QBox 50W TC Mod
      • 1 TFV8 Baby Beast
      • 2 V8-Baby M2 0.25Ω Dual Coil Heads
      • 1 MicroUSB Cable
      • 2 Vapor Bands
      • Spare Parts
      • Instructional Manual


      The Smok QBox Starter Kit is another winning combination as it includes a tiny but mighty MOD with the award winning TFV8 Baby Beast Subtank!

      The Smok QBox is an advanced yet simple to use MOD that featured a very large screen. Very compact and light weight, the Smok QBox MOD is powered by a 1600mAh built-in battery with a 50W Max Output. The QBOX 50W TC features the latest SMOK chipset with a range of 1 to 50W, three output modes, and full temperature control. The OLED screen displays detailed vaping data from your wattage or temperature to how many amps the device is firing at on a six lines and three columns matrix. Navigation is intuitive thanks to the 3 buttons interface. The built-in battery can be charged through a micro USB. At the 1A max charging current, the battery can be fully charged in 1.5 to 2 hours. 

      The QBox Full Kit includes a TFV8 Baby Beast Sub-Ohm Vape Tank. The TFV8 Baby Beast Tank is based off the extremely popular Smok TFV4 tank. The upgraded airflow, coil system, tank filling, and tank capacity proves to be just as good as the full size Smok TFV8 Tank. Featuring large dual cyclops adjustable airflow, this tank allows you to finely tune the air until you find that sweet spot. The center chimney diameter has also been enlarged to maximize air travel through the tank. While the swivel top fill feature remains generally the same, the fill port size has increased for easier refill.

      The QBox and TFV8 Baby Beast Tank is your Starter Kit of choice if you are looking for a compact set up that will fit in your pocket or purse without compromising on performance. Select one of our awesome High VG Vape Juices and you are all set to enjoy your Smok QBox and TFV8 Baby Beast Tank!


      Get replacement coils for the TFV8 Baby Beast here.


      You might also be interested in the following links for our Store:


      No warranty is offered on our advanced products. These items are intended for advanced users who have a working knowledge of how electronic devices work and have access to the necessary safety tools. Proper precautions should be taken when using these items as to not cause damage to them or harm to you.

      Advanced products should not be used by anyone without the proper knowledge of ohm's law and how it applies to MODs. Users should know their battery's amp limit and how to test atomizer resistance.

      Make sure the battery is properly installed and polarity respected (i.e. negative terminal on the push button side). You should remove the battery from your MOD before you put it in your pocket or purse. Make sure to clean the threads and contacts to help maintain optimum performance. Copper mechanical MODs require extra care as copper is a soft metal. The natural patina on copper and brass MODs can cause the threads to lock if not properly  maintained.

      Understanding how to handle and care for lithium type batteries is very important and should always be practiced. Lithium type batteries are very sensitive to charging characteristics and may explode or flame if mishandled. Do not charge your batteries overnight or while unattended for a prolonged period of time. Always charge your batteries in a fire-proof surface/area and do not expose them to high temperatures (i.e. inside your car). Do not expose the battery's terminals to metal objects or immerse in water or liquid. We are not responsible for any damage if there is any misuse, abuse, or modification to batteries and/or chargers in any shape or form. Furthermore, we are not responsible or liable for any injury, property damage, or defect that is caused by misuse, abuse, or modification of batteries and/or chargers.

      Scroll to top